Honda

This 72 Watt 12 inch CREE LED Off Road Light Bar is perfect for riders who need serious light. The combination flood/spot lights emit 5760 lumens of brightness to accommodate both work and recreational lighting needs. The rugged housing is a modern,...

This 180 Watt 30 inch CREE LED Off Road Light Bar is perfect for riders who need serious light. The combination flood/spot lights emit 14,400 lumens of brightness to accommodate both work and recreational lighting needs. The rugged housing is a modern,...

This 36 Watt 12 inch CREE LED Off Road Light Bar is perfect for riders who need serious light. The combination flood/spot lights emit 2880 lumens of brightness to accommodate both work and recreational lighting needs. The rugged housing is a modern,...

Synthetic Winch Rope has a higher breaking strength than that of steel cable but weighs far less. It won't bind up or develop those sharp frays that give nasty slivers. It doesn't conduct electricity or heat, so it won't freeze your hands in winter. It...

Aluminum Hawse Fairleads for Synthetic Winch Rope on ATV's and UTV's.  Reduce wear & tear on your synthetic rope with this fairlead. Stainless steel mounting hardware is included. Bolt dimensions are 3/8"-16 x 3/4", 5/16" allen head. Aluminum...

These durable ATV/UTV roller fairleads will reduce wear on your steel winch cable and greatly assist with angled pulls. Delron bushings & Zinc plated rollers Black mount is powder coated using an industrial grade process Actual measurements are...

This winch flush mount rocker switch is designed to sit flush on your UTV's dash board for easy use and a polished look.  Works well with all Viper Classic, Max and Elite Series Winches.

Keep the hot sun out while you're on the trail with a Tinted Roof from SuperATV. Constructed of 1/4" hard coated abrasive resistant material; and designed specifically to fit the body of your Pioneer 1000 & 1000-5, this roof will provide protection...

High Lifer Front Forward Arms for the Honda Pioneer 1000 maximize ground clearance by strategically arching the lower control arms while following the angle of the axle for maximum clearance, axle protection, and visual appeal. Don’t be fooled with...

The High Lifter Max Clearance Rear Lower Control Arms for the Honda Pioneer 1000 feature a dual bend design giving you the MOST clearance you can get from the frame to the hub without adding a lift. These a-arms provide 3" of additional clearance where...

Raising the Bar You get unmatched strength, style, and dependability with SuperATV’s 6” Lift Kit for the Honda Pioneer 1000. It’s engineered to deliver all-out performance so you can take on the deepest mud pits and most heart-thumping...

Take your Honda Pioneer 1000 to the edge with High Lifter’s 2” Signature Series Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. Our engineers and staff have spent over 20...

This fully adjustable CFab A-Arm/Control Arm kit is loaded with great features for your Honda Pioneer 1000 to run those bigger tires you've always wanted!  With this kit you will receive a set of front forward upper & lower arched arms along...

Strong Made's new line of bumpers for the Honda Pioneer 1000 & 1000-5 has the added feature of being able to mount a winch (not included) onto the bumper itself.  No need to buy any additional mounting plates. Features: Textured black power...

Get the most out of your Honda Pioneer 1000 with SuperATV's maximum clearance 1.5" forward a-arms. Get an additional 2" of clearance without adding a lift kit! Backed by a Lifetime Warranty and featuring 1.25" tubing, this unique dual bend design was...

This 3" Lift Kit by Texas Tough Customs for the Honda Pioneer 1000 comes with everything you need to bolt-on and ride!  This kit contains front and rear upper and lower arched a-arms, TTC HD tie rods, ball joints, SATV UHMW...

These Honda Pioneer 1000 HID conversion kits allow you to replace your dull factory headlights with ease because of TRUE PLUG-N-PLAY components made specifically to fit your machine.  No splicing, cutting, gluing, modifying nor changing out...

SuperATV's heavy duty winch mount plate for the Honda Pioneer 1000 is designed to withstand the strain of pulling your machine out under the most extreme circumstances. We personally torture test our products to ensure your mount is the last thing you...

These winch mounts are laser cut and shaped specifically to fit the Honda Pioneer 1000.  By utilizing state of the art computerized equipment a precise and custom fit is provided for your ATV.  These mounts are also designed to utilize the...

If you want a lift kit that measures true to size, withstands all levels of trail torture, and outperforms everything else in its class, you need SuperATV’s 3” Lift Kit. It gives your Honda Pioneer 1000 a full three inches of additional...

Nothing beats the versatility of having the protection of a full windshield or full airflow with the ease of simply changing a latch location - who said you can't have your cake and eat it too. Help protect you and your passenger from sticks and other...

Prevent bent or broken tie rods on your Honda Pioneer 1000 with this Heavy Duty Tie Rod Kit by CFab.Features: Fits all Honda Pioneer 1000 Models Kit comes complete with Chromoly heim joints, rods, clevis’s, and misalignment bushings Fully CNC...

Get the most out of your Honda Pioneer 1000 with SuperATV's maximum clearance rear a-arms. Get an additional 2" of clearance without adding a lift kit! Backed by a Lifetime Warranty and featuring 1.25" tubing, this unique dual bend design was carefully...

Rhino 2.0 Lasts Longer With Rhino 2.0 Axles installed on your Honda Pioneer 1000, you can take on wilder trails. SuperATV’s Rhino 2.0 Axles combine maximized shafts and CVs with heavy-duty 4340 steel that’s heat treated for superior strength...

There is a no return policy on all snorkel kits so please read full description. The newly designed Honda Pioneer 1000 snorkel is engineered as the first molded design in the industry.  From fit to finish, to the level of detail, High Lifter kits...

Go Deep Your Pioneer wasn’t built for getting buried in mud or sinking in creeks, but you do it anyway. Why? Because that’s what you’re built for. There’s nothing better than pushing your machine to the limits—pedal down,...

Protecting your Honda Pioneer 1000 & 1000-5 engine and venting points from mud and water ingestion is essential when riding in harsh areas.   These snorkel kits are designed to relocate the factory air intake point from under the plastics to a...

Gen 3 Portals are Geared for All SuperATV’s GDP 4” Portal Gear Lift for the Honda Pioneer 1000 is Geared for All. Choose from 15% or 30% gear reductions and cast or billet aluminum housings so you can optimize for the riding you love most. ...

Gen 3 Portals are Geared for All SuperATV’s GDP 6” Portal Gear Lift for the Honda Pioneer 1000 gives you a lift and a gear reduction in one box. Get the clearance to run bigger tires and the torque you need to turn them. The lift and gear...

Help protect you and your passenger from sticks and other flying debris while blazing the trail with a SuperATV windshield - the best off-road windshield on the market. Each windshield is a super tough polycarbonate construction with a bottom seal that's...

Get more stability, more style, and more clearance with SuperATV’s Honda Pioneer 1000 Wheel Spacers. The right wheel spacers can fix a multitude of suspension issues. If you’re using aftermarket wheels with an offset that causes your tires to...

If you're tired of getting muddy every time you ride your Honda Pioneer 1000-3 or 1000-6, these fenders are for you!  All fender flares are machine cut and made from a premium American made flexible material that is textured on top and smooth on the...

If you're tired of getting muddy every time you ride your Honda Pioneer 1000-5, these fenders are for you!  All fender flares are machine cut and made from a premium American made flexible material that is textured on top and smooth on the inside...

Protecting your Honda Pioneer 500 engine and venting points from mud and water ingestion is essential when riding in harsh areas.   These snorkel kits are designed to relocate the factory air intake point from under the plastics to a higher...

Gen 3 Portals are Geared for All SuperATV’s GDP 4” Portal Gear Lift for the Honda Pioneer 500 is Geared for All. What do we mean by that? Our 4” portal lift is available with 15% or 30% gear reductions. That means you get exactly what...

Nothing beats the versatility of having the protection of a full windshield or full airflow with the ease of simply changing a latch location - who said you can't have your cake and eat it too. Help protect you and your passenger from sticks and other...

Strong Made's new line of bumpers for the Honda Pioneer 500/520 has the added feature of being able to mount a winch (not included) onto the bumper itself.  No need to buy any additional mounting plates. Features: Textured black power coat Top...

Protecting your Honda Pioneer 520 engine and venting points from mud and water ingestion is essential when riding in harsh areas.   These snorkel kits are designed to relocate the factory air intake point from under the plastics to a higher...

Protecting your Honda Pioneer 700 & 700-4 engine and venting points from mud and water ingestion is essential when riding in harsh areas.   These snorkel kits are designed to relocate the factory air intake point from under the plastics to a...

Gen 3 Portals are Geared for All SuperATV’s GDP 4” Portal Gear Lift for the Honda Pioneer 700 is Geared for All. What do we mean by that? Our 4” portal lift is available with 15% or 30% gear reductions. That means you get exactly what...

This Bosman Designs Full Width Front Bumper for the Honda Talon was designed to compliment the Talon body lines unlike any other bumper on the market. Not only does it looks good, it also has built-in mounting holes for most winches on the...

This Bosman Designs Front Bumper has been fully redesigned to fit the new 2022 Honda Talon front end.  It was designed to compliment the Talon body lines unlike any other bumper on the market. Not only does it looks good, it also has built-in...

A Tougher, Smarter Skid Plate  Protect your Honda Talon 1000R and 1000X’s undercarriage with a SuperATV ARMW Skid Plate. This proprietary 1/2” ARMW is cut to fit your Talon perfectly. With a patented interlocking design, this skid plate...

Built for Action Your favorite thing to do in your Talon is to put your foot down and get thrown into the back of your seat. If you don’t want to fill your teeth with bugs or shred your face with sand, you need SuperATV’s Glass...

Finish your Talon’s Bed Get a SuperATV Bed Enclosure/Tailgate for your Honda Talon 1000R and 1000X. Honda made an awesome UTV with a nice deep bed but didn’t close it off with a tailgate or enclosure. SuperATV fixes that with our tubed bed...

MudBusters Honda Talon rear mud guards were designed to fill the gaps located in front of the rear wheels. This area is susceptible to getting filled with debris from the rear tires. Dust also enters the cab through this exposed section as well. These...

Don’t Flood Your Engine Your Honda Talon 1000 is made to do a lot of things, but going for a swim in a bounty hole isn’t one of them. So if you want to dive deep without swamping your machine, you’ve got some modifications to make...

Protecting your Honda Talon 1000 engine and venting points from mud and water ingestion is essential when riding in harsh areas.   These snorkel kits are designed to relocate the factory air intake point from under the plastics to a higher location...

This Snorkit provides protection while maintaining a professional, factory looking kit designed specifically for your Honda Talon 1000X/1000R. This is achieved by venting the vital systems into higher, safer location as well as explaining sealing...

Ride Year Round A Scratch Resistant Flip Windshield from SuperATV installed on your Honda Talon means you can ride through every season. Keep it closed for those frigid winter days or secure it in the vented position to let in air but keep the rain and...

A Bulletproof Bumper for a Powerful Talon Whether you ride a Honda Talon 1000X or a Talon 1000R, it's built for going fast and riding hard. The Talon is not built for slamming into trees, boulders, and stumps. That’s why SuperATV’s Front...

Ride Through Every Season Ride through rain, sleet, or snow with SuperATV’s Scratch Resistant Polycarbonate Full Windshield installed on your Honda Talon 1000R or 1000X. Every day is ride day. This 1/4” polycarbonate windshield is incredibly...

A Half Windshield Diverts Air Install a SuperATV Polycarbonate Half Windshield on your Honda Talon 1000R or Talon 1000X to block the wind but keep the open-air feel you love. Our half windshield is designed to keep the full force of the wind out of your...

A Half Windshield Diverts Air Install a SuperATV Polycarbonate Half Windshield on your Honda Talon to block the wind but keep the open-air feel you love. Our half windshield is designed to keep the full force of the wind out of your face by diverting it...

Finish Your Talon’s Doors SuperATV’s Honda Talon 1000 Aluminum Lower Doors are lightweight and durable. They’re contoured to match your Talon’s curves giving it a sleek look. The fit is tight and rattle free, so there’s no...

Nerf Bars that Save Your Ride Your Honda Talon 1000 is built for high flying action and white-knuckle riding. They’re not built for smashing into trees and rocks. Lucky for you, that’s exactly what SuperATV’s Nerf Bars for the Honda...

The Toughest Bumper Around Your Honda Talon needs a rear bumper that can handle all the power it cranks out. The kind of bumper that still looks good after you back into a few rocks. That’s where SuperATV’s Rear Bumper for the Honda Talon...

Tough and Practical Beat the elements with SuperATV’s Polycarbonate Rear Windshield installed on your Honda Talon 1000X and 1000R. The 1/4” polycarbonate material is tough enough to keep out rocks and mud kicked up by your rear tires because...

Get more stability, more style, and more clearance with SuperATV’s Honda Talon 1000 Wheel Spacers. The right wheel spacers can fix a multitude of suspension issues. If you’re using aftermarket wheels with an offset that causes your tires to...

A Heavy-Duty Winch Mount from SuperATV installed on your Honda Talon 1000R and 1000X gives you a secure mounting point for winches. A strong mount is just as important as a strong winch—don’t get caught with a mount that can’t take the...

Keep flying mud & debris out of your Honda Talon 1000R with a set of these awesome fender flare extensions by Mudbusters! We have several options to choose from below. Please keep in mind, the Talon 1000R models are 68.5" wide versus 64" wide for the...

Upgrade or replace those broken cv axles on your Honda Talon 1000R with these superior Rhino 2.0 Axles by SuperATV!  Designed and built to be the best on the market at a price point that is very affordable PLUS a 18 month warranty! Features: 25%...

3” of Lift Gives You More Clearance Get SuperATV’s 3” Lift Kit for your Honda Talon 1000R and up your riding game. Our true 3” lift kit gives you more clearance to get wild. With a max tire size of up to 37” when using a 1...

Gen 3 Portals Are Geared for All We don’t like putting anyone in a box. Riding is personal and you should be able to customize your machine to suit your riding style. That’s why we give you options with our GDP portals. Get SuperATV’s...

Gen 3 Portals Are Geared for All Everyone knows there’s no such thing as a “one size fits all” off-road experience. It all comes down to where, when, and how you like to ride. That’s why SuperATV’s Gen 3 portals are all...

Stand Above the Rest Make your Honda Talon 1000R stand out like the menacing monster it is with an 8” Lift Kit from SuperATV. It’ll have you cruising over obstacles and through mud pits with the ease of a hot knife through butter. But be...

Gen 3 Portals Are Geared for All Your 68” wide Honda Talon is built for action—that’s why you bought it after all. But if you want to take your side-by-side to the extreme, you need SuperATV’s 8” GDP Portal Gear Lift. It...

More Strength, More Clearance The Honda Talon 1000R is a sport UTV unlike any other, and it deserves parts that stand out like SuperATV’s High-Clearance A-Arms. With their arched, 1.25” diameter tubed design, you get 1.5” of extra...

Keep flying mud & debris out of your Honda Talon 1000X with a set of these awesome fender flare extensions by Mudbusters! We have several options to choose from below. The vehicle shown in the pictures is a 68.5" wide 1000R model with our narrower...

Upgrade or replace those broken cv axles on your Honda Talon 1000X with these superior Rhino 2.0 Axles by SuperATV!  Designed and built to be the best on the market at a price point that is very affordable PLUS a 18 month warranty! Features: 25%...

2” of Lift Gives You More Clearance What can SuperATV’s 2” Lift Kit for the Honda Talon 1000X do for you? These true 2” lift kit give you more clearance to get wild. With a max tire size of up to 29” on a stock suspension,...

Gen 3 Portals Are Geared for All We don’t like putting anyone in a box. Riding is personal and you should be able to customize your machine to suit your riding style. That’s why we give you options with our GDP portals. Get SuperATV’s...

Gen 3 Portals Are Geared for All Everyone knows there’s no such thing as a “one size fits all” off-road experience. It all comes down to where, when, and how you like to ride. That’s why SuperATV’s Gen 3 portals are all...

Gen 3 Portals Are Geared for All Your Honda Talon 1000X is built for action—that’s why you bought it after all. But if you want to take your side-by-side to the extreme, you need SuperATV’s 8” GDP Portal Gear Lift. It gives you a...

Clears 34” Tires With a set of SuperATV 1.5” Forward Offset A arms installed on your Honda Talon 1000X, you’ll have room to roll on massive 34” tires without a lift. These high-clearance A arms are made with heavy-duty 1...

The Ultimate ATV Winch When you’re out on the trail, miles from the road, you have to trust your own grit to get you and your quad through every mud hole and washout. When that’s not enough, you need a winch you can rely on. With...

When you get into trouble, a SuperATV 3500 lb. Black Ops Winch is your best friend. With a 50' synthetic rope, wireless remote control and brakes to hold the spool on inclines, weather proof seals to keep your gears turning this winch is ready to go when...

When you get into trouble, a SuperATV 4500 lb. Black Ops Winch is your best friend. With a 50' synthetic rope, wireless remote control and brakes to hold the spool on inclines, weather proof seals to keep your gears turning this winch is ready to go when...

A big UTV winch is designed to solve big problems—problems like burying your four-seater side-by-side in six feet of mud or jamming between some massive boulders. If you get your UTV in rough situations, you need a 6000 Lb. Black Ops Winch to...

The Viper Elite 4000lb winch by MotoAlliance is the top of the line choice for full size ATV's or UTV's.  These winches come with whisper quiet metal gears, easy to use synthetic cable, and the ultra flexible wireless remote switch - along with all...

The Viper Elite 4500lb winch by MotoAlliance is the top of the line choice for full size ATV's or UTV's.  These winches come with whisper quiet metal gears, easy to use synthetic cable, and the ultra flexible wireless remote switch - along with all...

The Viper Elite 6000 lb winch by MotoAlliance is the top of the line choice for full size ATV's and UTV's.  These winches come with whisper quiet metal gears, easy to use synthetic cable, and the ultra flexible wireless remote switch - along with...