Can-Am Renegade 500/800/850/1000 (12-16) High Lifter 1.5" Lift Kit
- Free Shipping
Take your Can-Am Renegade to the edge with High Lifter’s 1.5” Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. High Lifter's engineers and staff have spent over 20 years perfecting the ultimate ATV lift kit. The product? An easy-to-install, bolt-on lift that consistently measures truer over competitor products.
The High Lifter 1.5” Lift Kit relocates the shock mounts to provide additional lift making room for larger tires and tightens suspension. Each Lift Kit part is precision cut and zinc plated for durability and reliability in any environment.
- All hardware needed for successful installation
- User-friendly instructions
- Bolt-on application; takes approximately 1-2 hours for install
- Zinc plated
- Front & Rear lift
- This kit does NOT fit any MAX OR XMR models.
- If running Outlaw DHT Axles and this lift kit, you need to remove the rear spacer as shown in the instructions. If running this lift kit with stock axles, the rear spacer is still needed. Please refer to the instruction manual for further information.
- The rear lift brackets will not work with with High Lifter Max Clearance Trailing Arms. Lift is built into the trailing arm. If you use this lift plus our trailing arms it will cause axle problems.
2012 Can-Am Renegade 1000
2013 Can-Am Renegade 1000
2013 Can-Am Renegade 800R
2013 Can-Am Renegade 500
2014 Can-Am Renegade 500
2014 Can-Am Renegade 800R
2014 Can-Am Renegade 800R XXC
2014 Can-Am Renegade 1000
2014 Can-Am Renegade 1000 XXC
2015 Can-Am Renegade 500
2015 Can-Am Renegade 800R
2015 Can-Am Renegade 1000
2015 Can-Am Renegade 1000 XXC-DPS
2015 Can-Am Renegade 800R XXC-DPS
2016 Can-Am Renegade 850
2016 Can-Am Renegade 1000
2016 Can-Am Renegade 850 XXC
2016 Can-Am Renegade 1000 XXC