$3,899.00
Share

Honda Talon 1000X SuperATV 8" Portal Gear Lift

  • Honda Talon 1000X SuperATV 8" Portal Gear Lift
  • Honda Talon 1000X SuperATV 8" Portal Gear Lift
  • Honda Talon 1000X SuperATV 8" Portal Gear Lift
  • Honda Talon 1000X SuperATV 8" Portal Gear Lift
  • Honda Talon 1000X SuperATV 8" Portal Gear Lift
  • Honda Talon 1000X SuperATV 8" Portal Gear Lift
  • Honda Talon 1000X SuperATV 8" Portal Gear Lift
  • Honda Talon 1000X SuperATV 8" Portal Gear Lift
  • Honda Talon 1000X SuperATV 8" Portal Gear Lift
  • Honda Talon 1000X SuperATV 8" Portal Gear Lift
  • Honda Talon 1000X SuperATV 8" Portal Gear Lift
  • Honda Talon 1000X SuperATV 8" Portal Gear Lift
  • Honda Talon 1000X SuperATV 8" Portal Gear Lift
  • Honda Talon 1000X SuperATV 8" Portal Gear Lift
Add to Cart

Options

$3,899.00

Info

,Shipping:

Info

MPN:
PGH8-3-82
Shipping:
Free Shipping

Warranty

Limited Lifetime Warranty When filling gear box use only 80W-90 gear oil. Usi…

Warranty

Limited Lifetime Warranty When filling gear box use only 80W-90 gear oil. Using grease will cause failure of gears and bearings. Using grease will void your warranty. SuperATV extends the following limited lifetime warranty. This limited warranty extends only to the original purchaser. SuperATV warrants this product and its parts (excluding bearings, seals, & gaskets). Warranty is limited to material and / or workmanship defect at the time of shipment from the factory, and in no event shall seller have any liability for consequential damages of any kind resulting from a breach of this warranty. This warranty will be void on all products that show evidence of misapplication, improper installation, abuse, lack of proper maintenance, negligence, or alteration from original design. This warranty is in lieu of any other warranties, either expressed or implied, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTIBILTY OR FITNESS FOR ANY PARTICULAR PURPOSE. Procedures for obtaining warranty service: Should you have any problems with your Gear Driven Performance product, please call SuperATV Customer Service at 855-743-3427. Please have a copy of your original purchase receipt available, with dealer name (if applicable), date of purchase, and invoice number when calling for technical help. Most often, installation, or break in procedural issues (See break in procedure information, located in the instructions) can be handled quickly by speaking with one of our customer service representatives. If it is determined that repairs are required to your Gear Driven Performance portal, you MUST acquire an RGA number from our customer service team. RGA's and repair services are ONLY rendered by SuperATV. Any shipping costs incurred after 30 days (starting from the original purchase date) on any Portal returned for repair is the customer's responsibility. ALL Portals must be returned in the original box, with the original packaging, or a similarly well protected box. ALL portals must have the RGA number clearly written on the outside of the package. NO COD packages will be accepted, and no package will be accepted without an RGA number written on the outside of the box. Shipping information, including address and method, will be given to you by our customer service team and/or listed on our website when you create your RGA. Upon arrival of your warranty parts we will have them inspected by our technicians to determine if the damage was a manufacturing defect or rider/installation error. The inspection usually takes place 1-2 days after the package arrives. SuperATV will then call you with the results of the inspection. Depending on the outcome of the inspection, you may be required to pay a replacement fee for the broken parts (prices may vary depending on parts that need to be replaced). We do our best to get your issues corrected as soon as possible so you can get back out on the trails. We also match shipping labels for our customers. If you ship the warranty parts to us with an overnight label, we will return the favor and send you the replacements parts on an overnight shipment at no charge. Replacement bearings, seals and gaskets can be found at www.SuperATV.com. Thank you for your business!

Description

Will ship around July 28th

Gen 3 Portals Are Geared for All
Your Honda Talon 1000X is built for action—that’s why you bought it after all. But if you want to take your side-by-side to the extreme, you need SuperATV’s 8” GDP Portal Gear Lift. It gives you a massive lift and a 45% gear reduction. That gives you room to run massive tires and tons of torque for quick acceleration. It’s the ultimate UTV lift.

GDP—the Most Trusted Name in Portals
When you add a set of GDP portals to your machine, you’re joining thousands of other riders who experience the strength and reliability of this product every time they get behind the wheel. More side-by-side enthusiasts turn to SuperATV for portals over any other brand, and there’s a reason for that. GDP portals are the most trusted, tested, and proven, hands down.

Perfect for Mud
There’s no better way to tackle a killer mud hole than rolling on a set of portals. The extra ground clearance keeps you from getting bogged down, and the 45% gear reduction keeps your huge tires turning to keep you moving forward.

A Gear Reduction That Protects Your Drivetrain
By putting the gear reduction in the hub, GDP portals don’t put any extra stress on your machine’s drivetrain. This means your axles, differential, prop shaft, and transmission are able to do their job without acquiring any premature wear and tear. Being able to ride without worry lets you focus on what’s really important—having fun.

Unmatched Gear Material
Your portals are only as strong as the gears inside of them, so SuperATV made theirs as smart and strong as humanly possible. These top-of-the-line gears are made using 9310 alloy steel, which is insanely strong. SuperATV also precision grind them to ensure that they mate perfectly with every revolution. Long story short, these gears deliver a super smooth and quiet performance, no matter how you ride.

Stronger Housings by Design
SuperATV went all out when designing their portal housings, because they know how important it is for them to be stronger, smarter, and more reliable than anything else out there. And what’s more, you get options—choose from cast or USA-made, CNC-machined 6061 billet aluminum. Whichever you choose, you’re getting housings that are second to none.

  • GDP housings are reinforced in all the right places
  • They’re built with better oil flow and gearing forces in mind
  • There are no gimmicks and no vents because vents do more harm than good—we know because we tested them

The Strongest Portal Backing Plates You Can Get
Portal backing plates are made using an advanced steel alloy that’s specialized for ultra-high force applications, so you know it’s tough enough to put up with your level of trail abuse. At 5/16” thick and with a metal that’s even stronger than chromoly, these backing plates are guaranteed to perform for years on end.

Advanced Gaskets and Seals
Whether you go with cast or billet, both housings use:

  • Advanced Thermo-Tork® gaskets with excellent oil resistance and a lower deterioration rate than Kevlar gaskets
  • A sealed input gear and double-lipped output seal
  • 100% sealing coverage throughout so you can forget about oil leaks

Bearings That Rock
You’ll never have to worry about your bearings failing after installing GDP portals on your machine. Roller bearings are used to hold the idler gear because we understand the value of ultra-strong parts. The output bearing is a double-angular contact bearing that can handle huge loads in any direction without showing wear. What does all of this mean for you? It means you’re getting bearings that are built for battle and made to last.

Universal Hubs and Slotted Rotors
GDP portals come with precision-ground, stainless steel slotted rotors that stay cool and give you the braking power you need, when you need it. Our portals also come with universal hubs that have 4/156, 4/137, 4/115, and 4/110 bolt patterns and lugs. This means you’ll be able to run nearly any side-by-side wheel under the sun! We also invented the tapered output shaft that attaches to the hubs. It gives you a more secure lock that keeps your hubs from wobbling or wearing over time.

Features:

  • Available with billet or cast aluminum housings
  • Cool, quiet, precision-ground gears made from 9310 alloy billet steel
  • 1.5 in. diameter 4340 hardened steel driveshaft
  • Housings use Thermo-Tork® gaskets that don’t let anything through
  • Universal hub fits all major bolt patterns
  • Gear reduction reduces stress on your drivetrain

Wheel Requirements:

  • 22" or larger wheel required
  • Wheels cannot exceed 5" backspacing

Applications:
Honda Talon 1000X : 2019+

Other Portal Options:
Honda Talon 1000X SuperATV 4" Portal Gear Lift
Honda Talon 1000X SuperATV 6" Portal Gear Lift

California Proposition 65 Warning
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.

Save

Save

Save

Save

Save

Save