$3,095.00
Share

Can-Am Renegade GEN 2 (13-19) 6" High Lifter Lift Kit

Add to Cart

Options

$3,095.00

Info

SKU:CLK-DXL-C1R ,Shipping:

Info

SKU:
CLK-DXL-C1R
MPN:
CLK-DXL-C1R
Shipping:
Calculated at Checkout

Description

Take your Can-Am Renegade to the edge with High Lifter’s 6" Big Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. High Lifter engineers and staff have spent over 20 years perfecting the ultimate lift kit. The product? The Big Lift Kit is even easier to install with a bolt-on application that consistently measures truer over competitor products.

Outlaw DHT XL Axle:

  • Dual heat treatments on the housings to improve toughness against shock loads without compromising bearing surfaces and long term life
  • Oversized CV joint housings to increase strength
  • Housings and bars made from 4340 Chromoly steel
  • Puncture-resistant boots which are durable in high and low temperature climates
  • Molybdenum disulfide, anti-oxidation, rustproof, and high-performance

Outlaw RCV Axle:

The Outlaw RCV axles are proudly built and assembled in the USA. Assembled by High Lifter and Manufactured by RCV Performance, the makers of high performance drive line products.

  • The Outlaw RCV uses the RCV Performances patented cage
  • Sliding bars on both ends for increased angle capability
  • Bars, housings, cages, and races made of high strength alloy steel
  • Well established and proven design

This 6" lift kit package includes the following components:

  • 10" Increased Track Width
  • Heavy Duty Laser Cut Front & Rear Upper Lift and Shock Relocation Brackets
  • Heavy Duty Max Clearance Front Control Arms (1 1/4 " DOM) Heavy Duty Rear Trailing Arms (2" DOM) with Additional Support Gussets & Shock Mounts
  • 4 Custom Outlaw DHT XL or RCV Axles
  • New Tie Rod Set Up for Smooth & Easy Steering
  • New Front & Rear Brake Line Kits
  • All Hardware & Brackets
  • All Lift Brackets, Control Arms, Trailing Arms & Tie Rods come with a Durable Powder Coated Finish
  • Detailed Instructions with Installation Photos

Notes:

  • Allow up to 5 days for powder-coating.  This is a pre-order product.
  • Factory Ball Joints and Bushings will be re-used in this kit.  Please check for wear and order new if needed.

Applications:
2013 Can-Am Renegade 1000
2013 Can-Am Renegade 800R
2013 Can-Am Renegade 1000 XXC
2013 Can-Am Renegade 800R XXC
2014 Can-Am Renegade 800R
2014 Can-Am Renegade 800R XXC
2014 Can-Am Renegade 1000
2014 Can-Am Renegade 1000 XXC
2015 Can-Am Renegade 800R
2015 Can-Am Renegade 1000
2015 Can-Am Renegade 1000 XXC-DPS
2015 Can-Am Renegade 800R XXC-DPS
2016 Can-Am Renegade 850
2016 Can-Am Renegade 1000
2016 Can-Am Renegade 850 XXC
2016 Can-Am Renegade 1000 XXC
2016 Can-Am Renegade 1000 XMR

2017 Can-Am Renegade 1000
2017 Can-Am Renegade 1000 XMR
2017 Can-Am Renegade 1000 XXC
2017 Can-Am Renegade 850
2017 Can-Am Renegade 850 XXC
2018 Can-Am Renegade 1000
2018 Can-Am Renegade 1000 XMR
2018 Can-Am Renegade 1000 XXC
2018 Can-Am Renegade 850
2018 Can-Am Renegade 850 XXC
2019 Can-Am Renegade 1000
2019 Can-Am Renegade 1000 XMR
2019 Can-Am Renegade 1000 XXC
2019 Can-Am Renegade 850
2019 Can-Am Renegade 850 XXC

 

Warning Warning: This product can expose you to chemicals including Titanium Dioxide, which is known in the State of California to cause cancer and birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov