Take your Polaris Ranger 570/900/1000 to the edge with High Lifter’s 2” Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. High Lifter's engineers and staff have spent over 15 years perfecting the ultimate ATV lift kit. The product? An easy-to-install, bolt-on lift that consistently measures truer over competitor products.
The High Lifter 2” Lift Kit relocates the shock mounts to provide additional lift making room for larger tires and tightens suspension. Each Lift Kit part is precision cut and zinc plated for durability and reliability in any environment.
This kit contains alignment cones for 10mm bolts for use with factory tie rod/rod ends and OEM bolts If you have upgraded or plan to upgrade to our Pro Series Tie Rod/Rack End kit, see notes below.
- All hardware needed for successful installation
- User-friendly instructions
- Bolt-on application; takes approximately 1-2 hours for install
- Zinc plated
- Front and rear lift
2016 Polaris Ranger 570 Full Size XP
2016 Polaris Ranger 900 XP
2016 Polaris Ranger 1000 DSL
2016 Polaris Ranger 900 XP High Lifter Edition
2016 Polaris Ranger 570-4 Full Size Crew
2016 Polaris Ranger 570-6 Full Size Crew
2016 Polaris Ranger 900-5 Crew EPS
2016 Polaris Ranger 900-6 Crew EPS
2016 Polaris Ranger 1000 DSL Crew
2013 Polaris Ranger 900 XP
2014 Polaris Ranger 900 XP
2014 Polaris Ranger 900 Crew
2015 Polaris Ranger 570 Full Size
2015 Polaris Ranger 570 Crew Full Size
2015 Polaris Ranger 570 Crew Full Size EPS
2015 Polaris Ranger 900 XP
2015 Polaris Ranger 900 XP EPS
2015 Polaris Ranger 900 Crew
2015 Polaris Ranger 900 CREW EPS
2015 Polaris Ranger 1000 DSL
2015 Polaris Ranger 1000 DSL Crew
2017 Polaris Ranger 1000
2017 Polaris Ranger 1000 Crew
2017 Polaris Ranger 1000 Crew EPS
2017 Polaris Ranger 1000 Crew High Lifter Edition
2017 Polaris Ranger 1000 EPS
2017 Polaris Ranger 1000 High Lifter Edition
2017 Polaris Ranger 1000 SE
2017 Polaris Ranger 900
2017 Polaris Ranger 900 Crew
2017 Polaris Ranger 900 Crew EPS
2017 Polaris Ranger 900 EPS
2017 Polaris Ranger DSL
2017 Polaris Ranger DSL Crew
- 1.5" wheel spacers are required in the rear if you are running factory 900 Ranger steel wheels. Wheels spacers can be purchased by clicking HERE.
- This lift kit will not fit any 2016 570 XP Full Size Ranger with front strut suspension.
- This lift kit will not fit Polaris Ranger Northstar Editions.
- This lift kit will work with the High Lifter Edition Ranger with up to 32.5" tires. There will be slight rubbing when it's fully compressed in a hard turn left or right.